Drop Tester DT2000s is used to test the breakage of various small items and components.

Drop Tester DT2000s is used to test the breakage of various small products up to 5 kilograms. With our Drop Tester you can also attach a high frequency video camera to the equipment in order to verify what actually happens, when the tested item hits the base of the machine.

Test product is attached to the suction pads and dropped from a height of 500 – 2 000 mm or speed of 3.45 – 6.25 m/s. The dropping sled guides the test item down towards the base at the wanted orientation.

DROP HEIGHT
500–2000 mm (optional extensions up to 5000 mm)

DROP PLATFORM
Set custom dropbase 0–200 mm

DROP VELOCITY
3.45–6.25 m/s

TEST CAPACITY
up to 5kg (10kg with EW and EWW)

Read all the product information from our brochure

DROP TESTER DT2000s
with optional high-speed camera

Standardized tests

The machine can be used to perform standardized tests in accordance with;

• IEC 60068-2-31
• IEC 60601-1
• IEC 62368-1
• ISO 11608-1
• MIL-STD-810H, Method 516.8

The tester complies with directive 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Restrictions
Drop Tester must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.

Heina Drop Tester DT2000n is used to test the breakage of various small items and components.

The Heina Drop Tester DT2000n is the latest in the evolution of drop testing! The test protocols in use allow for accurate pre-planning and execution of tests in exactly the desired way. They allow test sets to be easily reproduced and a test report of each can be saved for later review.

Modern Workflow to Drop Testing

The optional cloud service allows you to view test reports from anywhere in the world, as well as easily share test protocols between multiple test devices. 

Heina Measurement App streamlines drop testing with seamless integration between the device and Heina’s drop tester. It leverages the dropped object’s sensors for on-the-fly data analysis.

Read more about our Heina Measurement App

Drop Testing Basics With Heina Drop Tester

Drop testing itself is as simple as before. Test product is attached to the suction pads or to the optional pneumatic gripper and dropped from a height of 500–2000 mm to the desired drop base (concrete, steel, wood, etc.). The dropping sled guides the test item down towards the base at the wanted orientation.

The operator can record observations in the test report after each drop. This makes it easy to go through the test cases and results later.

CREATE YOUR
test protocol

RECORD
test data

REMOTELY
monitor results

COMPARE
collected data

Download our brochure

Read all the product information from our brochure

We comply with the turnkey principle for every customer

DROP TESTER DT2000n
with optional high-speed camera

Standardized Drop Tests

The Heina Drop Tester can be used to perform standardized tests in accordance with;

• IEC 60068-2-31
• IEC 60601-1
• IEC 62368-1
• ISO 11608-1
• MIL-STD-810H, Method 516.8

The tester complies with directive 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Drop Tester Restrictions

Drop Tester must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.

Drop Tester DT3000s is used to test the breakage of various small items and components.

Drop Tester DT3000s is used to test the breakage of various small products up to 5 kilograms. With our Drop Tester you can also attach a high frequency video camera to the equipment in order to verify what actually happens, when the tested item hits the base of the machine.

Test product is attached to the suction pads and dropped from a height of 500 – 3 000 mm or speed of 3.45 – 7.7 m/s. The dropping sled guides the test item down towards the base at the wanted orientation.

DROP HEIGHT
500–3000 mm (optional extensions up to 5000 mm)

DROP PLATFORM
Set custom dropbase 0–200 mm

DROP VELOCITY
3.45–7.7 m/s

TEST CAPACITY
Up to 5kg (10kg with EW and EWW)

Read all the product information from our brochure

DROP TESTER DT3000s
with optional high-speed camera

Standardized tests

The machine can be used to perform standardized tests in accordance with;

• IEC 60068-2-31
• IEC 60601-1
• IEC 62368-1
• ISO 11608-1
• MIL-STD-810H, Method 516.8

The tester complies with directive 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Restrictions
Drop Tester must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.

Tumble Tester II is used to test
the breakage of various small
products up to 1 kilograms.

The test product is placed in a Tumble Tester II barrel. When the desired number of drops and inspection intervals are selected, the machine is started. The machine drops the product to the base of the barrel in random positions (free fall).

The rotational speed of the machine is selected so that the object falls in the middle of the base. The machine can be modified according to the customer’s wishes.

DROP HEIGHT
500 and 1000 mm

DROP RATE
5–15 drops per minute (adjustable in 0.1 steps)

TEST CAPACITY
up to 1 kg (upgradable)

Read all the product information from our brochure

We comply with the turnkey principle for every customer

Standardized tests

The machine can be used to perform standardized tests in accordance with;

• IEC 60068-2-31
• IEC 60312-1
• IEC 61558-1

The tester complies with directive 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Restrictions
Tumble Tester II must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.

TUMBLER TESTER II
with optional high-speed camera

Abrasion Tumbler is used to test electronic devices’ durability against small particles such as dust, textile dust or sand.

The test items are placed in three Abrasion Tumbler drum compartments. The inside of the drum is coated with denim and small denim strips are also used as a standard abrasive material. Depending on the user’s needs, other materials can also be used.

All three compartments are separated by a dust-tight wall. Both the front and back of the drum are made of transparent polycarbonate. The rotation speed of the drum is adjustable from 10 to 30 rpm. The test time can be set from one minute to 24 hours with a programmable counter.

ADJUSTABLE ROTATION SPEED
10 – 30 rpm

TIME COUNTER
1 min – 24 hrs

TWO-WAY ROTATION
0 – 60 min

TEST CAPACITY
Up to 1kg (upgradable)

Read all the product information from our brochure

Directives
The tester complies with directives 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Restrictions
Abrasion Tumbler must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.

ABRASION TUMBLER 640/3i

Every project is planned and implemented accurately with years of experience.

Digital high-speed video allows engineers to visualize and study movements that cannot be viewed adequately in real  time. The recorded slow-motion video can be used to determine the exact point where cracks / tears occur, how they  occur and worsen. This information is essential for optimal product improvements.

TEMA Heina Motion Analysis

TEMA provides the highest accuracy in testing by adding advanced motion analysis to the testing process. TEMA users can import slow-motion videos and automatically track a specific object throughout the sequence using proprietary tracking algorithms. The result is presented in predefined formats, such as tables and graphs, showing quantifiable values such as position, velocity, and acceleration over time.

We comply with the turnkey principle for every customer