Drop Tester DT2000n with optional high-speed camera

Precision
drop testing
with modern
workflow

Drop Tester DT2000n is used to test the breakage of various small items and components.

The Drop Tester DT2000n is the latest in the evolution of drop testing! The test protocols in use allow for accurate pre-planning and execution of tests in exactly the desired way. They allow test sets to be easily reproduced and a test report of each can be saved for later review. The optional cloud service allows you to view test reports from anywhere in the world, as well as easily share test protocols between multiple test devices. 

Testing itself is as simple as before. Test product is attached to the suction pads or to the optional pneumatic gripper and dropped from a height of 500–2000 mm to the desired drop base (concrete, steel, wood, etc.). The dropping sled guides the test item down towards the base at the wanted orientation. The operator can record observations in the test report after each drop. This makes it easy to go through the test cases and results later.

CREATE YOUR
test protocol

RECORD
test data

REMOTELY
monitor results

COMPARE
collected data


Read all the product information from our brochure


Drop Testing Specifications

  • Drop height: 500 – 2 000 mm (optional extensions up to 5 000 mm)
  • Drop platform: Set custom drop base 0 – 200 mm
  • Drop velocity: 3.45 – 6.25 m/s
  • Test capacity: up to 5 kg (10 kg with EW and EWW)

Features

  • PC hardware with display
  • Drop testing software
  • Adjustable drop height and orientation
  • Adjustable product offset: -100 to +300
  • Steady aluminium frame, reliable construction
  • Safety cage and electronic door lock
  • Reliable and accurate results with dropping sled
  • Minimal orientation variation
  • Easy access to product for inspection
  • Drop counter
  • High frequency video camera trigger output

Optional Features

  • Extended drop height up to 5 000 mm
  • Larger EW and EWW models for bigger and/or heavier products (eg laptop), up to 10 kg
  • Accessories, such as Pneumatic Gripper, large vacuum head, different types of suction cups with quick connectors, Placement jig, etc.
  • High-speed camera
  • TEMA Heina Motion Analysis

DROP TESTER DT2000n
with optional high-speed camera

Width900 mm
Height2320 mm
Depth900 mm
Weight300 kg
Engine power0.25 kW
Air supply / Air flow6 bar / 150 l/min
Electrical supply100-240 V, 50-60 Hz
BNC OutputTrigger for camera
CE markingYes

Standardized tests

The machine can be used to perform standardized tests in accordance with;

  • IEC 60068-2-31
  • IEC 60601-1
  • IEC 62368-1
  • ISO 11608-1
  • MIL-STD-810H, Method 516.8

The tester complies with directive 2006/42/EY, 2014/35/EU and 2014/30/EU, and standard SFS EN ISO 12100 has been applied.

Restrictions
Drop Tester must not be used to test explosive objects or such objects which at breaking release hazardous gases that may cause a health risk to the user or the surroundings.