Drop Tester
New “n”-series

High-class drop-testing

Heinä’s Drop Tester DT2000n is used to test the breakage of various small items and components. Our new “n” Series Drop Tester allows you to create your own test protocols, record the data, and monitor and compare the results remotely. A simple pass/fail feature after every drop minimises operator errors and smooths the testing process as much as possible.

The machine meets the following drop-testing standards: IEC 60068-2-31 and IEC 60601-1 standard drop test and Standard MIL-STD-810G, Method 516.5. The item to be tested can be attached to the suction pads of the machine and dropped from a selected speed of 3.5–6.25 m/s or a height of 500–2000 mm (optional 300–5000 mm).

The dropping tray guides the item down towards the base at a right angle. With our new “n” Series Drop Tester you can also attach a high-frequency video camera to the equipment to verify what actually happens when the tested item hits the base of the machine. The brand new DT2000n complies with European Machine Directive 89/392 and its amendments 91/368, 93/44 and 93/68.

Create your own test protocol

You can record the test data and monitor the results remotely.

Fewer operator errors

The brand new software allows you to perform monitoring and follow-up with ease, reducing operator errors.

Smoother operations

All generated reports are stored after testing, so you can compare the data you have collected. The monitoring and follow-up processes have been made more convenient for the operator.

For more information, please contact us.

Send email

Technical specification

Width900 mm
Height2400 mm
Depth900 mm
Fall heights500-2000 mm (optional 300-5000 mm)
Fall speed3,5-6,25 m/s
Engine power0,25 kW
Machine weight300 kg
Max item weightup to 5 kg depending on dropped item (up to 10kg with larger layout Drop Tester)
Electrical supply100-240 V, 50-60 Hz
Air supply6 bar (150 l/min)
CE-markingYes